Recent Changes

Wednesday, June 21

  1. page Temperature sensor reads too high edited ... Frequently Asked Questions My temperature reads different than an official weather station, l…
    ...
    Frequently Asked Questions
    My temperature reads different than an official weather station, like National Weather Service, Weather Channel, etc. Why is that?
    ...
    important. You wilwill find the
    ...
    own guidelines. SurfaceStations.org has done a wonderful job of documenting the poor quality of official NOAA weather stations.
    Again, compare to a mercury thermometer (see above) in a shaded, well controlled area, like the inside of your house.
    Why do digital thermometers have a margin of error ( +/- 2 degF) ? If they are more expensive than a mercury thermometer, shouldn't they be more accurate?
    (view changes)
    7:13 am

Thursday, June 15

  1. page ws1001-wifi edited ... Note: You only need to download the latest version. Multiple versions are shown to track chang…
    ...
    Note: You only need to download the latest version. Multiple versions are shown to track changes.
    Firmware Update History:
    Version 2.4.2
    June 15, 2017
    Changes:
    1. A customer found the wind speed displayed 65531 degrees, which was introduced in Version 2.4.1.

    Version 2.4.1
    May 15, 2017
    (view changes)
    6:19 am

Wednesday, June 14

  1. page Manufacturer Phone Numbers edited ... WWW.MAJESTIC-ELECTRONICS.COM 800-423-2961 MANNIX INSTRUMENTS (General Tools) GENERAL TOOLS…
    ...
    WWW.MAJESTIC-ELECTRONICS.COM
    800-423-2961
    MANNIX INSTRUMENTS (General Tools)GENERAL TOOLS
    WWW.GENERALTOOLS.COM
    212-431-6100
    (view changes)
    1:39 pm
  2. msg WS3000 blank after firmware upgrade message posted WS3000 blank after firmware upgrade I recently updated my WS3000 with the latest 1.1.6 firmware from ambient weather web page http://…
    WS3000 blank after firmware upgrade
    I recently updated my WS3000 with the latest 1.1.6 firmware from ambient weather web page http://www.ambientweather.com/ws3000.html and now my ws3000 is dead. It flashes when I plug it in, but otherwise shows only a blank screen. I can re-flash it, and I get a OK message, but it doesn't work after power cycle. Haw can I fix this??
    11:05 am

Thursday, June 8

  1. page ws1200 edited ... Important Note! Before you upgrade the firmware, check the About Page* and make certain you ar…
    ...
    Important Note! Before you upgrade the firmware, check the About Page* and make certain you are running Firmware Version 2.x.x. Failure to do so may cause your console to stop working.
    *To determine your firmware version, select Factory | About | Display from the console.
    ...
    User Manual). You can not restore this data at the present time.
    Updating Firmware Instructions:
    1. Download the latest zip file (below) to your your computer. Make a note of where you saved this file.
    (view changes)
    9:02 am

Tuesday, June 6

  1. msg 915 MHz vs 433 MHz message posted 915 MHz vs 433 MHz I just updated my WS3000 with the latest 1.1.6 firmware from ambient weather web page http://www.…
    915 MHz vs 433 MHz
    I just updated my WS3000 with the latest 1.1.6 firmware from ambient weather web page http://www.ambientweather.com/ws3000.html and now my ws3000 is dead. It flashes when I plug it in, but otherwise shows only a blank screen. I can re-flash it, and I get a OK message, but it doesn't work after power cycle. Haw can I fix this??
    11:46 am

Sunday, June 4

  1. msg WS-1001 console lockup message posted WS-1001 console lockup have the latest SW. I talked to tech support and are sending me a new console and power supply. Ve…
    WS-1001 console lockup
    have the latest SW. I talked to tech support and are sending me a new console and power supply. Very good support
    10:03 am
  2. msg WS-1001 console lockup message posted WS-1001 console lockup have the latest SW. I talked to tech support and are sending me a new console and power supply. Ve…
    WS-1001 console lockup
    have the latest SW. I talked to tech support and are sending me a new console and power supply. Very good support
    10:03 am

Friday, June 2

  1. msg WS-1001 console lockup message posted WS-1001 console lockup You got the new firmware Version 4.1.2? Once I bumped mine up to the firmware 4. . . it seemed to s…
    WS-1001 console lockup
    You got the new firmware Version 4.1.2? Once I bumped mine up to the firmware 4. . . it seemed to stable the console out.
  2. msg WS-1001 console lockup message posted WS-1001 console lockup I've had issues, but its with the ObserverIP 1400.
    WS-1001 console lockup
    I've had issues, but its with the ObserverIP 1400.

More